Description: This dataset comprises the ‘best available’ agricultural land class (ALC) data – land classes A, B, C and D. ALC mapping identifies agricultural land that can be used sustainably for a range of land uses with minimal land degradation. The classes imply a decreasing range of land use choice and an increase in the severity of limitations and/or land degradation hazard.
Description: This dataset represents land which has been identified either within approved project plans, approved property plans and associated affected lands and non-statutory plans.
Description: This dataset represents land which has been identified either within approved project plans, approved property plans and associated affected lands and non-statutory plans.
Description: This dataset represents land which has been identified either within approved project plans, approved property plans and associated affected lands and non-statutory plans.
Description: This dataset represents land which has been identified either within approved project plans, approved property plans and associated affected lands and non-statutory plans.
Description: This dataset contains concern points for the Upper Condamine floodplain project mapping in Southern Queensland, published in 2002 across 22 reference areas. The points were identified by the floodplain community at the planning workshops and appear on the project PDF maps as Identified Issue/Problem Areas. The project report and mapping outline a detailed strategy as part of a landscape approach to resource management across the Upper Condamine Catchment and is intended to lay down a framework for future activities on floodplains.
Description: Natural flow lines for the Upper Condamine floodplain project mapping in Southern Queensland, published in 2002 across 22 reference areas. The flow lines appear on the project PDF maps as 'Where the water should flow'. The project report and mapping outline a detailed strategy as part of a landscape approach to resource management across the Upper Condamine Catchment and is intended to lay down a framework for future activities on floodplains.
Description: Workshop identified flow lines from 1996 flood for the Upper Condamine floodplain project mapping in Southern Queensland, published in 2002 across 22 reference areas. The flow lines were identified by the floodplain community at the planning workshops and appear on the project PDF maps as 'Where the water currently flows'. The project report and mapping outline a detailed strategy as part of a landscape approach to resource management across the Upper Condamine Catchment and is intended to lay down a framework for future activities on floodplains.
Description: This dataset contains contours for the Upper Condamine floodplain project mapping in Southern Queensland, published in 2002 across 22 reference areas. The contours appear on the project PDF maps. The project report and mapping outline a detailed strategy as part of a landscape approach to resource management across the Upper Condamine Catchment and is intended to lay down a framework for future activities on floodplains.
Description: <DIV STYLE="text-align:Left;"><DIV><P><SPAN>This dataset is a map key for the Upper Condamine floodplain project mapping in Southern Queensland, published in 2002 and comprises 22 reference areas. The project report and mapping outline a detailed strategy as part of a landscape approach to resource management across the Upper Condamine Catchment and is intended to lay down a framework for future activities on floodplains.</SPAN></P></DIV></DIV>
Description: <DIV STYLE="text-align:Left;"><DIV><DIV><P STYLE="margin:0 0 11 0;"><SPAN>This dataset is a </SPAN><SPAN>collation of the available soil surface carbon sites in the Queensland Government Soil and Land Information (SALI) database. Site data is attributed with surface carbon data as well as land use, disturbance, Australian Soil Classification (ASC), surface clay percent and surface texture. Carbon site data has been measured using multiple lab methods and each site is attributed with the corresponding lab method. Last updated 20/10/2023.</SPAN></P></DIV></DIV></DIV>
Name: Project boundaries best available polygon mapping
Display Field: project_name
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: This dataset is a guide to the best available soil and landresourcemapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets.This dataset accompanies the QLD_BEST_AVL_SOIL_POLY_DATA dataset which contains all individual project mapping polygons and their attributes.
Name: Project polygons best available polygon mapping
Display Field: proj_poly
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: This dataset is a compilation of the best available soil and land resource polygon datasets across Queensland. Contributing polygon datasets are at various scales (1: 2,000-1: 2,000,000) and map types (Soil Profile Classes, Soil Types, Land Units, Land Systems and Land Resource Areas).
Description: This dataset is a compilation of the best available soil and land resource polygon datasets across Queensland. Contributing polygon datasets are at various scales (1: 2,000-1: 2,000,000) and map types (Soil Profile Classes, Soil Types, Land Units, Land Systems and Land Resource Areas).
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Color: [255, 255, 255, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 14 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: <DIV STYLE="text-align:Left;"><DIV><DIV><P><SPAN>This dataset is a Soil Landscapes map covering the State of Queensland, and is a subset of the national </SPAN><SPAN>Atlas of Australian Soils</SPAN><SPAN>dataset </SPAN><SPAN>(Northcote et al. 1960-1968)</SPAN><SPAN>. </SPAN><SPAN>The digital version of the Atlas of Australian Soils was created by NRIC in 1991 from scanned tracings of the published hardcopy maps (1 - 10)</SPAN><SPAN>. The mapping scale is 1: 2,000,000 and 1,426 Soil Landscapes were identified. The original survey was completed by CSIRO. </SPAN><SPAN>For further information on the ATLAS of Australian Soil coverage visit http://www.asris.csiro.au/themes/Atlas.html</SPAN><SPAN>.</SPAN></P></DIV></DIV></DIV>
Name: Project boundaries land management manual mapping
Display Field: project_name
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Name: Project polygons land management manual mapping
Display Field: project_code
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: This dataset contains mappingcompiled to support the Land Management Manuals that have been published for parts of South East and CentralQueensland.
Name: Project boundaries other land resource mapping better than 1:250 000 scale
Display Field: project_name
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Name: Project boundaries other land resource mapping 1:250 000 scale
Display Field: project_name
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Name: Project boundaries other land resource mapping 1:500 000 scale
Display Field: project_name
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Name: Project boundaries other land resource mapping 1:1 000 000 scale
Display Field: project_name
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Name: Project boundary acid sulfate soils - National scale
Display Field: project_code
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: This dataset depicts variable scale Acid Sulfate Soils (ASS) mapping along coastal Queensland, clipped from a national map compiled by Fitzpatrick et al. (2011). The original dataset was clipped in 2021 to only include the Queensland state boundary, areas below 20m elevation and areas where there is no finer scale ASS mapping available currently. NOTE: This is composite data layer sourced from best available data with polygons depicted at varying scales and classified with varying levels of confidence. Great care must be taken when interpreting this map and particular attention paid to the “map scale” and confidence rating of a given polygon. It is stressed that polygons rated with Confidence = 4 are provisional classifications inferred from surrogate data with no on ground verification. Also some fields contain a “-“, denoting that a qualification was not able to be made, usually because a necessary component of source mapping coverage did not extend to the given polygon.
Name: Project polygons acid sulfate soils - National scale
Display Field: natcass
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: This dataset depicts variable scale Acid Sulfate Soils (ASS) mapping along coastal Queensland, clipped from a national map compiled by Fitzpatrick et al. (2011). The original dataset was clipped in 2021 to only include the Queensland state boundary, areas below 20m elevation and areas where there is no finer scale ASS mapping available currently. NOTE: This is composite data layer sourced from best available data with polygons depicted at varying scales and classified with varying levels of confidence. Great care must be taken when interpreting this map and particular attention paid to the “map scale” and confidence rating of a given polygon. It is stressed that polygons rated with Confidence = 4 are provisional classifications inferred from surrogate data with no on ground verification. Also some fields contain a “-“, denoting that a qualification was not able to be made, usually because a necessary component of source mapping coverage did not extend to the given polygon.
Description: Provides a graphical representation of the location of field observations of gully and channel erosion and other observed erosion features. A desktop assessment is also conducted after the field survey has been completed and attributes such as gully continuity and connectivity are assessed.
Description: Provides a graphical representation of the boundary extent of gully density and presence mapping. This data is collected for use in Paddock to Reef Water Quality models.
Description: Provides a graphical representation of gully density within 1 x 1 km grid cells. It represents the count of 100 x 100 m cells that contains gully and/or channel erosion within the 100m Gully Presence layer. This layer provides a measure of the gully and channel erosion density in a 1 km cell and allows comparison against other cells.
Description: Provides a graphical representation of the boundary extent of gully density and presence mapping. This data is collected for use in Paddock to Reef Water Quality models.
Name: Project boundary gully presence mapping- Burnett Mary
Display Field: st_area(shape)
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: Provides a graphical representation of the boundary extent of gully density and presence mapping. This data is collected for use in Paddock to Reef Water Quality models.
Name: Project polygons gully presence mapping- Burnett Mary
Display Field: uid_1km_grid
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: Provides a broad graphical representation of the presence or absence of active gully and channel erosion within 100 x 100m grid cellsinthe Burnett Marycatchment. This layer represents gully and channel erosion that is not modelled as part of the Paddock to Reef Catchment model stream network.
Name: Project boundary gully presence mapping- Cape York
Display Field: st_area(shape)
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: Provides a graphical representation of the boundary extent of gully density and presence mapping. This data is collected for use in Paddock to Reef Water Quality models.
Name: Project polygons gully presence mapping- Cape York
Display Field: uid_1km_grid
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: Provides a broad graphical representation of the presence or absence of active gully and channel erosion within 100 x 100m grid cells. This layer represents gully and channel erosion that is not modelled as part of the Paddock to Reef Catchment model stream network.
Description: Provides a graphical representation of the boundary extent of gully density and presence mapping. This data is collected for use in Paddock to Reef Water Quality models.
Description: Provides a broad graphical representation of the presence or absence of active gully and channel erosion within 100 x 100m grid cellsin the Fitzroy catchment. This layer represents gully and channel erosion that is not modelled as part of the Paddock to Reef Catchment model stream network.
Description: Provides a graphical representation of the boundary extent of gully density and presence mapping. This data is collected for use in Paddock to Reef Water Quality models.
Description: Provides a broad graphical representation of the presence or absence of active gully and channel erosion within 100 x 100m grid cells in the Mackay Whitsunday catchment. This layer represents gully and channel erosion that is not modelled as part of the Paddock to Reef Catchment model stream network.
Description: Provides a graphical representation of the boundary extent of gully density and presence mapping. This data is collected for use in Paddock to Reef Water Quality models.
Description: Provides a broad graphical representation of the presence or absence of active gully and channel erosion within 100 x 100m grid cellsin the Wet Tropics catchment. This layer represents gully and channel erosion that is not modelled as part of the Paddock to Reef Catchment model stream network.
Description: This dataset is a point dataset of landslips mapped as part of the land degradation study of the Bremer and Lockyer catchments, South East Queensland based on a 1979 survey. The Bremer mapping is at a scale of 1:50,000 and Lockyer mapping is at a scale of 1:100,000 and mapped land degradation includes sheet erosion, rill erosion, gully erosion and saline outbreaks. Accompanying datasets are the QLD_LAND_DEGRADATION_MAPPING which is a polygon dataset available for both catchments and the QLD_LAND_DEGRADATION_GULLIES which is a polyline dataset mapping individual gullies in the Lockyer catchment.
Description: This dataset is a polyline dataset of gullies mapped as part of the land degradation study of the Lockyer catchment, South East Queensland based on a 1979 survey. The Lockyer mapping is at a scale of 1:100,000. Accompanying datasets are the QLD_LAND_DEGRADATION_MAPPING which is a polygon dataset available for both catchments and the QLD_LAND_DEGRADATION_LANDSLIPS which is a point dataset available for both catchments.
Description: This dataset is a guide to soil and landscape mapping available throughout Queensland. The extent of each mapping project is shown along with information about the project and links to downloadable documents and datasets. Last updated July 2022.
Description: This dataset is a land degradation map of the Bremer and Lockyer catchments, South East Queensland based on a 1979 survey. The Bremer mapping is at a scale of 1:50,000 and the Lockyer mapping is at a scale of 1:100,000 and mapped land degradation includes sheet erosion, rill erosion, gully erosion and saline outbreaks. Accompanying datasets are the QLD_LAND_DEGRADATION_LANDSLIPS which is a point dataset available for both catchments and the QLD_LAND_DEGRADATION_GULLIES which is a polyline dataset mapping individual gullies in the Lockyer catchment.